Our local DOT drug and alcohol testing centers are located in Amberg WI and the surrounding areas providing DOT drug testing, DOT alcohol testing and DOT physicals for all DOT modes regulated by Part 40. Same day service is available at our Amberg WI DOT drug testing facilities and most of our DOT drug testing locations are within minutes of your home or office.
What type of DOT Testing is required?
Coastal Drug Testing provides DOT pre-employment, random, post-accident, reasonable suspicion and return to duty testing at our Amberg WI DOT drug testing centers.
If you hold a CDL license, a large, medium or a small trucking company, Coastal Drug Testing has a complete DOT compliance package which includes all the requirements to comply with CFR 49 part 40.
All Coastal Drug Testing DOT drug testing centers utilize SAMHSA Certified laboratories and a licensed Medical Review Officer as required by DOT part 40 regulations.
The U.S Department of Transportation (DOT) requires that all DOT regulated "safety sensitive" employees have a negative DOT pre-employment drug test result on file and be actively enrolled in a DOT approved random drug and alcohol random testing pool (consortium).
In addition, if a DOT regulated company has more than one "safety sensitive" employee, the employer must also have a written DOT drug and alcohol policy along with an on-site supervisor that must have completed a reasonable suspicion supervisor training program.
On the road and need a DOT Drug or Alcohol test? No Worries!
To be compliant with DOT regulations, a company's DOT drug and alcohol testing program must have the following components:
- Employee Drug Testing
- Written Drug and Alcohol Policy
- Supervisor Training
- Substance Abuse Referral
- Employee Education
- Random Selection Program
- Post Accident Testing
- Designated Employer Representative
- Federal Chain of Custody Forms
- Part 40 Regulations on File
The Department of Transportation (DOT) has specific drug and alcohol testing requirements for the all transportation modes all DOT agencies.
Our modes included are:
- Federal Motor Carrier Safety Administration (FMCSA)
- Federal Aviation Administration (FAA)
- Federal Transit Administration (FTA)
- United States Coast Guard (USCG)
- Pipeline and Hazardous Materials Safety Administration (PHMSA)
- Federal Railroad Administration (FRA)
Are You Enrolled in a DOT Consortium?
Individuals who are employed in a position designated as "safety sensitive" must be actively enrolled in a random drug and alcohol testing program. Oftentimes, covered employees will join a group of other DOT regulated employees in a random testing program and this is referred to as a DOT Consortium. Generally, an employer who has less than fifty employees or single operators will join the consortium which will comply with the random drug and alcohol testing requirements of 49 CFR Part 40. Employers that have over 50 employees who are regulated by Part 40 may elect to be enrolled in a "stand alone" random testing pool.
The DOT consortium is cost effective and complies with all requirements of 49 CFR Part 40 which mandates that all "safety sensitive" employees be enrolled in a random drug and alcohol testing program.
The Department of Transportation (DOT) has strict regulations requiring regulated companies and independent operators (CDL License Holders) to be an active member of a DOT drug and alcohol Consortium and failure to comply with these regulations can result in significant fines and other DOT sanctions.
We are fully versed in the DOT procedures for pre-employment drug testing, random drug testing, reasonable suspicion drug testing, post-accident drug testing, return to duty drug testing and follow up drug testing.
DOT regulated companies with multiple safety sensitive employees must also have an employee within the company who is assigned as the "designated employer representative" (DER). This is the person responsible for removing any DOT "safety sensitive" employee who is covered by 49 CFR Part 40 from performing a DOT safety sensitive position when a positive drug or alcohol test result has occurred or an employee has refused to take a required DOT test.
If you have recently become a DOT regulated company, within the next 18 months the Department of Transportation (DOT) will conduct a "new entrant" inspection to ensure that you are in compliance with all DOT regulations including the drug and alcohol testing requirements. If you are currently a DOT regulated company, you are subject to regular inspections to ensure compliance.
Avoid DOT fines, penalties and be complaint with all DOT drug and alcohol testing regulations! Coastal Drug Testing can assist small, medium and large DOT companies in complying with all requirements of 49 CFR Part 40.
DOT Drug Testing Locations in Amberg WI
218 S US HIGHWAY 141 18.9 miles
CRIVITZ, WI 54114
106 S SCHOOL RD 19.4 miles
DAGGETT, MI 49821
1711 S STEPHENSON AVE STE 100 21.3 miles
IRON MOUNTAIN, MI 49801
1711 S STEPHENSON AVE STE 320 21.3 miles
IRON MOUNTAIN, MI 49801
1707 S STEPHENSON AVE STE 101 21.3 miles
IRON MOUNTAIN, MI 49801
15397 STATE HIGHWAY 32 PO BOX 179 23.3 miles
LAKEWOOD, WI 54138
(Don't see a location near you? Call us (800) 828-7086)
Local Area Info: Amberg, Wisconsin
Amberg is a town in Marinette County, Wisconsin, United States. The population was 854 at the 2000 census. The unincorporated community of Cedarville is located partially in the town. The census-designated place of Amberg is located within the town.
Amberg is located in Northeastern Wisconsin about 75 miles (121 km) north of Green Bay in Marinette County. The Amberg-Athelstane Granite is part of the Wisconsin Magmatic Terrane. The Wisconsin Magmatic Terrane is an area formed by a tectonic plate collision at about 1850 Ma. marked by the Niagara Fault Zone. The Amberg Granite is one of the most extensive in Wisconsin. It is well known for its great variety of color and texture. The two most common types are a fine-grained gray granite and a course-grained red granite known as "Amberg red." These granites were a valuable commodity in the late 19th century and early 20th century, causing quarries to be started in the area.
There were several main companies in the Amberg area during the late 19th and early 20th centuries. The Amberg Granite Company was the first in the area and later, the Pike River Granite Company, which formed in large part due to poor working conditions at the Amberg Granite Company. The Amberg Granite Company was owned by William Amberg of Chicago and consisted of quarry operations in Amberg - the Argyle, Martindale, the Athelstane and Aberdeen. The Argyle and the Martindale quarries produced the fine-grained gray granite and the Aberdeen quarry produced the "Amberg red." The Athelstane produced a gray granite, but course grained, similar in texture to the Amberg red. Much of their granite was used in Chicago for curbing blocks and street paving. It was also used for buildings such as, the Minnesota State Capitol, and buildings in Chicago and Cincinnati. The Pike River company produced primarily the fine-grained gray granite and much of it was sold as monumental stone because of its strength and attractiveness. However, in 1929, 500-600 cars of this stone was sold to the Universal Granite Company of Milwaukee to be used as breakwater stone. Although, once a thriving, profitable businesses, there are no longer any active quarries operating in the Amberg area. More about the history of these quarries and the surrounding area can be found at the Amberg Museum complex, this is located in the town of Amberg on Marinette County V, right off of Highway 141.