Employment, DOT, Court Ordered, Probation, School, Family

All Cities and All States

Most Testing Centers Within Minutes of Your Home or Work

Find a Location

(800) 828-7086
Testing Centers Nationwide
Same Day Service Available

Drug and Alcohol Testing Ingot CA - (800) 828-7086

DOT 300x183Our local DOT drug and alcohol testing centers are located in Ingot CA and the surrounding areas providing DOT drug testing, DOT alcohol testing and DOT physicals for all DOT modes regulated by Part 40. Same day service is available at our Ingot CA DOT drug testing facilities and most of our DOT drug testing locations are within minutes of your home or office.

What type of DOT Testing is required?

Coastal Drug Testing provides DOT pre-employment, random, post-accident, reasonable suspicion and return to duty testing at our Ingot CA DOT drug testing centers.

If you hold a CDL license, a large, medium or a small trucking company, Coastal Drug Testing has a complete DOT compliance package which includes all the requirements to comply with CFR 49 part 40.

All Coastal Drug Testing DOT drug testing centers utilize SAMHSA Certified laboratories and a licensed Medical Review Officer as required by DOT part 40 regulations.

The U.S Department of Transportation (DOT) requires that all DOT regulated "safety sensitive" employees have a negative DOT pre-employment drug test result on file and be actively enrolled in a DOT approved random drug and alcohol random testing pool (consortium).

In addition, if a DOT regulated company has more than one "safety sensitive" employee, the employer must also have a written DOT drug and alcohol policy along with an on-site supervisor that must have completed a reasonable suspicion supervisor training program.

On the road and need a DOT Drug or Alcohol test? No Worries!

To be compliant with DOT regulations, a company's DOT drug and alcohol testing program must have the following components:

  • Employee Drug Testing
  • Written Drug and Alcohol Policy
  • Supervisor Training
  • Substance Abuse Referral
  • Employee Education
  • Random Selection Program
  • Post Accident Testing
  • Designated Employer Representative
  • Federal Chain of Custody Forms
  • Part 40 Regulations on File

The Department of Transportation (DOT) has specific drug and alcohol testing requirements for the all transportation modes all DOT agencies.

Our modes included are:

  • Federal Motor Carrier Safety Administration (FMCSA)
  • Federal Aviation Administration (FAA)
  • Federal Transit Administration (FTA)
  • United States Coast Guard (USCG)
  • Pipeline and Hazardous Materials Safety Administration (PHMSA)
  • Federal Railroad Administration (FRA)

Are You Enrolled in a DOT Consortium?

Individuals who are employed in a position designated as "safety sensitive" must be actively enrolled in a random drug and alcohol testing program. Oftentimes, covered employees will join a group of other DOT regulated employees in a random testing program and this is referred to as a DOT Consortium. Generally, an employer who has less than fifty employees or single operators will join the consortium which will comply with the random drug and alcohol testing requirements of 49 CFR Part 40. Employers that have over 50 employees who are regulated by Part 40 may elect to be enrolled in a "stand alone" random testing pool.

The DOT consortium is cost effective and complies with all requirements of 49 CFR Part 40 which mandates that all "safety sensitive" employees be enrolled in a random drug and alcohol testing program.

The Department of Transportation (DOT) has strict regulations requiring regulated companies and independent operators (CDL License Holders) to be an active member of a DOT drug and alcohol Consortium and failure to comply with these regulations can result in significant fines and other DOT sanctions.

We are fully versed in the DOT procedures for pre-employment drug testing, random drug testing, reasonable suspicion drug testing, post-accident drug testing, return to duty drug testing and follow up drug testing.

DOT regulated companies with multiple safety sensitive employees must also have an employee within the company who is assigned as the "designated employer representative" (DER). This is the person responsible for removing any DOT "safety sensitive" employee who is covered by 49 CFR Part 40 from performing a DOT safety sensitive position when a positive drug or alcohol test result has occurred or an employee has refused to take a required DOT test.

If you have recently become a DOT regulated company, within the next 18 months the Department of Transportation (DOT) will conduct a "new entrant" inspection to ensure that you are in compliance with all DOT regulations including the drug and alcohol testing requirements. If you are currently a DOT regulated company, you are subject to regular inspections to ensure compliance.

Avoid DOT fines, penalties and be complaint with all DOT drug and alcohol testing regulations! Coastal Drug Testing can assist small, medium and large DOT companies in complying with all requirements of 49 CFR Part 40.

DOT Drug Testing Locations in Ingot CA

3016 WEST ST 15.4 miles

3016 WEST ST
SHASTA LAKE, CA 96019
Categories: SHASTA LAKE CA

4156 Ashby Court, 15.6 miles

4156 Ashby Court,
Shasta Lake, CA 96019
Categories: Shasta Lake CA

987 MISSION DE ORO DR Ste C 17.3 miles

987 MISSION DE ORO DR Ste C
REDDING, CA 96003
Categories: REDDING CA

1093 HILLTOP DR 17.4 miles

1093 HILLTOP DR
REDDING, CA 96003
Categories: REDDING CA

1710 CHURN CREEK RD 17.4 miles

1710 CHURN CREEK RD
REDDING, CA 96002
Categories: REDDING CA

1007 DANA DR STE A 17.5 miles

1007 DANA DR STE A
REDDING, CA 96003
Categories: REDDING CA

MEADOW OAK DR 17.6 miles

MEADOW OAK DR
REDDING, CA 96002
Categories: REDDING CA

610 AZALEA AVE 18.0 miles

610 AZALEA AVE
REDDING, CA 96002
Categories: REDDING CA

691 MARAGLIA ST STE A 18.3 miles

691 MARAGLIA ST STE A
REDDING, CA 96002
Categories: REDDING CA

2301 PARK MARINA DR STE 17 18.4 miles

2301 PARK MARINA DR STE 17
REDDING, CA 96001
Categories: REDDING CA

3270 CHURN CREEK RD 18.5 miles

3270 CHURN CREEK RD
REDDING, CA 96002
Categories: REDDING CA

455 SOUTH ST 18.6 miles

455 SOUTH ST
REDDING, CA 96001
Categories: REDDING CA

3462 BECHELLI LN STE F 19.0 miles

3462 BECHELLI LN STE F
REDDING, CA 96002
Categories: REDDING CA

1725 GOLD ST 19.4 miles

1725 GOLD ST
REDDING, CA 96001
Categories: REDDING CA

2510 Airpark Drive, Suite 202 20.1 miles

2510 Airpark Drive, Suite 202
Redding, CA 96001
Categories: Redding CA

2656 Gateway Dr, 22.0 miles

2656 Gateway Dr,
Anderson, CA 96007
Categories: Anderson CA

20647 COMMERCE WAY 25.0 miles

20647 COMMERCE WAY
BURNEY, CA 96013
Categories: BURNEY CA

(Don't see a location near you? Call us (800) 828-7086)

Local Area Info: Zamak

The name zamak is an acronym of the German names for the metals of which the alloys are composed: Zink (zinc), Aluminium, Magnesium and Kupfer (copper). The New Jersey Zinc Company developed zamak alloys in 1929. Zinc alloys are popularly referred to as pot metal or white metal. While zamak is held to higher industrial standards, it is still considered a pot metal.

The most common zamak alloy is zamak 3. Besides that, zamak 2, zamak 5 and zamak 7 are also commercially used. These alloys are most commonly die cast. Zamak alloys (particularly #3 and #5) are frequently used in the spin casting industry.

A large problem with early zinc die casting materials was zinc pest, owing to impurities in the alloys. Zamak avoided this by the use of 99.99% pure zinc metal, produced by New Jersey Zinc's use of a refluxer as part of the smelting process.

DATE TIME: 11-15-2024 7:31pm Fri