Employment, DOT, Court Ordered, Probation, School, Family

All Cities and All States

Most Testing Centers Within Minutes of Your Home or Work

Find a Location

(800) 828-7086
Testing Centers Nationwide
Same Day Service Available

Drug and Alcohol Testing Murraysville NC - (800) 828-7086

DOT 300x183Our local DOT drug and alcohol testing centers are located in Murraysville NC and the surrounding areas providing DOT drug testing, DOT alcohol testing and DOT physicals for all DOT modes regulated by Part 40. Same day service is available at our Murraysville NC DOT drug testing facilities and most of our DOT drug testing locations are within minutes of your home or office.

What type of DOT Testing is required?

Coastal Drug Testing provides DOT pre-employment, random, post-accident, reasonable suspicion and return to duty testing at our Murraysville NC DOT drug testing centers.

If you hold a CDL license, a large, medium or a small trucking company, Coastal Drug Testing has a complete DOT compliance package which includes all the requirements to comply with CFR 49 part 40.

All Coastal Drug Testing DOT drug testing centers utilize SAMHSA Certified laboratories and a licensed Medical Review Officer as required by DOT part 40 regulations.

The U.S Department of Transportation (DOT) requires that all DOT regulated "safety sensitive" employees have a negative DOT pre-employment drug test result on file and be actively enrolled in a DOT approved random drug and alcohol random testing pool (consortium).

In addition, if a DOT regulated company has more than one "safety sensitive" employee, the employer must also have a written DOT drug and alcohol policy along with an on-site supervisor that must have completed a reasonable suspicion supervisor training program.

On the road and need a DOT Drug or Alcohol test? No Worries!

To be compliant with DOT regulations, a company's DOT drug and alcohol testing program must have the following components:

  • Employee Drug Testing
  • Written Drug and Alcohol Policy
  • Supervisor Training
  • Substance Abuse Referral
  • Employee Education
  • Random Selection Program
  • Post Accident Testing
  • Designated Employer Representative
  • Federal Chain of Custody Forms
  • Part 40 Regulations on File

The Department of Transportation (DOT) has specific drug and alcohol testing requirements for the all transportation modes all DOT agencies.

Our modes included are:

  • Federal Motor Carrier Safety Administration (FMCSA)
  • Federal Aviation Administration (FAA)
  • Federal Transit Administration (FTA)
  • United States Coast Guard (USCG)
  • Pipeline and Hazardous Materials Safety Administration (PHMSA)
  • Federal Railroad Administration (FRA)

Are You Enrolled in a DOT Consortium?

Individuals who are employed in a position designated as "safety sensitive" must be actively enrolled in a random drug and alcohol testing program. Oftentimes, covered employees will join a group of other DOT regulated employees in a random testing program and this is referred to as a DOT Consortium. Generally, an employer who has less than fifty employees or single operators will join the consortium which will comply with the random drug and alcohol testing requirements of 49 CFR Part 40. Employers that have over 50 employees who are regulated by Part 40 may elect to be enrolled in a "stand alone" random testing pool.

The DOT consortium is cost effective and complies with all requirements of 49 CFR Part 40 which mandates that all "safety sensitive" employees be enrolled in a random drug and alcohol testing program.

The Department of Transportation (DOT) has strict regulations requiring regulated companies and independent operators (CDL License Holders) to be an active member of a DOT drug and alcohol Consortium and failure to comply with these regulations can result in significant fines and other DOT sanctions.

We are fully versed in the DOT procedures for pre-employment drug testing, random drug testing, reasonable suspicion drug testing, post-accident drug testing, return to duty drug testing and follow up drug testing.

DOT regulated companies with multiple safety sensitive employees must also have an employee within the company who is assigned as the "designated employer representative" (DER). This is the person responsible for removing any DOT "safety sensitive" employee who is covered by 49 CFR Part 40 from performing a DOT safety sensitive position when a positive drug or alcohol test result has occurred or an employee has refused to take a required DOT test.

If you have recently become a DOT regulated company, within the next 18 months the Department of Transportation (DOT) will conduct a "new entrant" inspection to ensure that you are in compliance with all DOT regulations including the drug and alcohol testing requirements. If you are currently a DOT regulated company, you are subject to regular inspections to ensure compliance.

Avoid DOT fines, penalties and be complaint with all DOT drug and alcohol testing regulations! Coastal Drug Testing can assist small, medium and large DOT companies in complying with all requirements of 49 CFR Part 40.

DOT Drug Testing Locations in Murraysville NC

1135 MILITARY CUTOFF RD STE 103 4.4 miles

1135 MILITARY CUTOFF RD STE 103
WILMINGTON, NC 28405
Categories: WILMINGTON NC

1319 MILITARY CUTOFF RD STE D 4.6 miles

1319 MILITARY CUTOFF RD STE D
WILMINGTON, NC 28405
Categories: WILMINGTON NC

706 S COLLEGE RD 5.1 miles

706 S COLLEGE RD
WILMINGTON, NC 28403
Categories: WILMINGTON NC

1611 CASTLE HAYNE RD STE G2 5.1 miles

1611 CASTLE HAYNE RD STE G2
WILMINGTON, NC 28401
Categories: WILMINGTON NC

4816 OLEANDER DR STE 200 6.3 miles

4816 OLEANDER DR STE 200
WILMINGTON, NC 28403
Categories: WILMINGTON NC

4815 OLEANDER DR 6.3 miles

4815 OLEANDER DR
WILMINGTON, NC 28403
Categories: WILMINGTON NC

1414 S 39TH ST 6.3 miles

1414 S 39TH ST
WILMINGTON, NC 28403
Categories: WILMINGTON NC

1925A OLEANDER DR 6.5 miles

1925A OLEANDER DR
WILMINGTON, NC 28403
Categories: WILMINGTON NC

119 CHESTNUT ST 7.0 miles

119 CHESTNUT ST
WILMINGTON, NC 28401
Categories: WILMINGTON NC

4402 SHIPYARD BLVD 7.1 miles

4402 SHIPYARD BLVD
WILMINGTON, NC 28403
Categories: WILMINGTON NC

608 DAWSON ST STE 101 7.2 miles

608 DAWSON ST STE 101
WILMINGTON, NC 28401
Categories: WILMINGTON NC

2505 DELANEY RD 7.9 miles

2505 DELANEY RD
WILMINGTON, NC 28403
Categories: WILMINGTON NC

202 VILLAGE RD NE 9.8 miles

202 VILLAGE RD NE
LELAND, NC 28451
Categories: LELAND NC

27 COMMERCE DR 10.7 miles

27 COMMERCE DR
ROCKY POINT, NC 28457
Categories: ROCKY POINT NC

6132 CAROLINA BEACH RD STE 8 12.9 miles

6132 CAROLINA BEACH RD STE 8
WILMINGTON, NC 28412
Categories: WILMINGTON NC

6312 CAROLINA BEACH RD 13.2 miles

6312 CAROLINA BEACH RD
WILMINGTON, NC 28412
Categories: WILMINGTON NC

509 OLDE WATERFORD WAY STE 101 14.5 miles

509 OLDE WATERFORD WAY STE 101
LELAND, NC 28451
Categories: LELAND NC

301 S CAMPBELL ST 18.0 miles

301 S CAMPBELL ST
BURGAW, NC 28425
Categories: BURGAW NC

502 US HIGHWAY 17 N 22.1 miles

502 US HIGHWAY 17 N
HOLLY RIDGE, NC 28445
Categories: HOLLY RIDGE NC

(Don't see a location near you? Call us (800) 828-7086)

Local Area Info: Interstate 140 (North Carolina)

Interstate 140 and North Carolina Highway 140 (I-140 / NC 140) is a 26.3-mile (42.3 km) freeway in the U.S. state of North Carolina. Broken into 2 designations, it serves as a bypass of Wilmington; providing a direct route between the Grand Strand and I-40. Officially known as the John Jay Burney Jr. Freeway, it is also known as the Wilmington Outer Loop, Wilmington Bypass and Northern Outer Loop. I-140 is an auxiliary Interstate Highway that runs between U.S. Route 17 (US 17) near Leland to I-40 near Murraysville. NC 140 travels between I-40 and US 17 in Kirkland.

I-140 begins at a trumpet interchange with US 17 west of downtown Wilmington. From there, it heads north, meeting US 74/US 76. Turning east, it interchanges with Mount Misery Road and Cedar Hill Road. It then crosses the Cape Fear River before interchanging with US 421. Continuing past US 421, I-140 continues in a northeasterly direction where it crosses the Northeast Cape Fear River on the Dan Cameron Bridge. After crossing the river, the route travels in an easterly direction where it meets NC 133 at a folded diamond interchange in Wrightsboro. From NC 133, I-140 continues to the east en route to its eastern terminus in Murraysville at an interchange with I-40,, a partial cloverleaf interchange with a flyover ramp from eastbound I-140 to westbound I-40. Here, I-140 ends and the road continues east as NC 140 through an undeveloped wooded area. After passing through the construction area for an interchange with the proposed NC 417 (Military Cutoff Road), NC 140 ends as US 17 merges into the road from a trumpet interchange in Kirkland.

The most notable feature of the existing route is the bridge spanning the Northeast Cape Fear River. The bridge measures 1.43 miles (2.30 km) in length with a main span of 479 feet (146 m) and 82 feet (25 m) of vertical clearance above the river, Rat Island and adjacent marshlands. Its construction consists of precast girders with cast-in-place decks leading to the main span consisting of cast-in-place cantilevered box girder elements. In November 2005, the North Carolina Board of Transportation voted unanimously to name the I-140 bridge across the Northeast Cape Fear River in honor of former Wilmington mayor and businessman Dan Cameron.

DATE TIME: 11-18-2024 9:44am Mon