Our local DOT drug and alcohol testing centers are located in Spruce WI and the surrounding areas providing DOT drug testing, DOT alcohol testing and DOT physicals for all DOT modes regulated by Part 40. Same day service is available at our Spruce WI DOT drug testing facilities and most of our DOT drug testing locations are within minutes of your home or office.
What type of DOT Testing is required?
Coastal Drug Testing provides DOT pre-employment, random, post-accident, reasonable suspicion and return to duty testing at our Spruce WI DOT drug testing centers.
If you hold a CDL license, a large, medium or a small trucking company, Coastal Drug Testing has a complete DOT compliance package which includes all the requirements to comply with CFR 49 part 40.
All Coastal Drug Testing DOT drug testing centers utilize SAMHSA Certified laboratories and a licensed Medical Review Officer as required by DOT part 40 regulations.
The U.S Department of Transportation (DOT) requires that all DOT regulated "safety sensitive" employees have a negative DOT pre-employment drug test result on file and be actively enrolled in a DOT approved random drug and alcohol random testing pool (consortium).
In addition, if a DOT regulated company has more than one "safety sensitive" employee, the employer must also have a written DOT drug and alcohol policy along with an on-site supervisor that must have completed a reasonable suspicion supervisor training program.
On the road and need a DOT Drug or Alcohol test? No Worries!
To be compliant with DOT regulations, a company's DOT drug and alcohol testing program must have the following components:
- Employee Drug Testing
- Written Drug and Alcohol Policy
- Supervisor Training
- Substance Abuse Referral
- Employee Education
- Random Selection Program
- Post Accident Testing
- Designated Employer Representative
- Federal Chain of Custody Forms
- Part 40 Regulations on File
The Department of Transportation (DOT) has specific drug and alcohol testing requirements for the all transportation modes all DOT agencies.
Our modes included are:
- Federal Motor Carrier Safety Administration (FMCSA)
- Federal Aviation Administration (FAA)
- Federal Transit Administration (FTA)
- United States Coast Guard (USCG)
- Pipeline and Hazardous Materials Safety Administration (PHMSA)
- Federal Railroad Administration (FRA)
Are You Enrolled in a DOT Consortium?
Individuals who are employed in a position designated as "safety sensitive" must be actively enrolled in a random drug and alcohol testing program. Oftentimes, covered employees will join a group of other DOT regulated employees in a random testing program and this is referred to as a DOT Consortium. Generally, an employer who has less than fifty employees or single operators will join the consortium which will comply with the random drug and alcohol testing requirements of 49 CFR Part 40. Employers that have over 50 employees who are regulated by Part 40 may elect to be enrolled in a "stand alone" random testing pool.
The DOT consortium is cost effective and complies with all requirements of 49 CFR Part 40 which mandates that all "safety sensitive" employees be enrolled in a random drug and alcohol testing program.
The Department of Transportation (DOT) has strict regulations requiring regulated companies and independent operators (CDL License Holders) to be an active member of a DOT drug and alcohol Consortium and failure to comply with these regulations can result in significant fines and other DOT sanctions.
We are fully versed in the DOT procedures for pre-employment drug testing, random drug testing, reasonable suspicion drug testing, post-accident drug testing, return to duty drug testing and follow up drug testing.
DOT regulated companies with multiple safety sensitive employees must also have an employee within the company who is assigned as the "designated employer representative" (DER). This is the person responsible for removing any DOT "safety sensitive" employee who is covered by 49 CFR Part 40 from performing a DOT safety sensitive position when a positive drug or alcohol test result has occurred or an employee has refused to take a required DOT test.
If you have recently become a DOT regulated company, within the next 18 months the Department of Transportation (DOT) will conduct a "new entrant" inspection to ensure that you are in compliance with all DOT regulations including the drug and alcohol testing requirements. If you are currently a DOT regulated company, you are subject to regular inspections to ensure compliance.
Avoid DOT fines, penalties and be complaint with all DOT drug and alcohol testing regulations! Coastal Drug Testing can assist small, medium and large DOT companies in complying with all requirements of 49 CFR Part 40.
DOT Drug Testing Locations in Spruce WI
107 E Highland Dr 4.9 miles
OCONTO FALLS, WI 54154
200 S ROSERA ST 5.8 miles
LENA, WI 54139
855 S MAIN ST 6.1 miles
OCONTO FALLS, WI 54154
307 MANOR DR 10.7 miles
SURING, WI 54174
620 SMITH AVE 14.5 miles
OCONTO, WI 54153
820 Arbutus Ave 15.1 miles
OCONTO, WI 54153
331 E GREEN BAY ST 20.1 miles
PULASKI, WI 54162
401 W MILL ST 20.4 miles
BONDUEL, WI 54107
218 S US HIGHWAY 141 20.8 miles
CRIVITZ, WI 54114
441 FRENCH ST 21.3 miles
PESHTIGO, WI 54157
W3275 WOLF RIVER DR 24.1 miles
KESHENA, WI 54135
309 N BARTLETT ST 25.0 miles
SHAWANO, WI 54166
(Don't see a location near you? Call us (800) 828-7086)
Local Area Info: Picea glauca
Picea glauca, the white spruce, is a species of spruce native to the northern temperate and boreal forests in North America. Picea glauca was originally native from central Alaska all through the east, across southern/central Canada to the Avalon Peninsula in Newfoundland. It now has become naturalized southward into the far northern United States border states like Montana, Minnesota, Wisconsin, Michigan, Vermont, New Hampshire and Maine; there is also an isolated population in the Black Hills of South Dakota and Wyoming. It is also known as Canadian spruce, skunk spruce, cat spruce, Black Hills spruce, western white spruce, Alberta white spruce, and Porsild spruce.
The white spruce is a large coniferous evergreen tree which grows normally to 15 to 30 m (50 to 100 ft) tall, but can grow up to 40 m (130 ft) tall with a trunk diameter of up to 1 m (3.3 ft). The bark is thin and scaly, flaking off in small circular plates 5 to 10 cm (2 to 4 in) across. The crown is narrow – conic in young trees, becoming cylindric in older trees. The shoots are pale buff-brown, glabrous (hairless) in the east of the range, but often pubescent in the west, and with prominent pulvini. The leaves are needle-like, 12 to 20 mm (1?2 to 13?16 in) long, rhombic (diamond-shaped) in cross-section, glaucous blue-green above (whence glauca) with several thin lines of stomata, and blue-white below with two broad bands of stomata.
The cones are pendulous, slender, cylindrical, 3 to 7 cm (1 1?4 to 2 3?4 in) long and 1.5 cm (5?8 in) wide when closed, opening to 2.5 cm (1 in) broad. They have thin, flexible scales 15 mm (0.59 in) long, with a smoothly rounded margin. They are green or reddish, maturing to pale brown 4 to 8 months after pollination. The seeds are black, 2 to 3 mm (3?32 to 1?8 in) long, with a slender, 5 to 8 mm (3?16 to 5?16 in) long pale brown wing.