Our local DOT drug and alcohol testing centers are located in Harford NY and the surrounding areas providing DOT drug testing, DOT alcohol testing and DOT physicals for all DOT modes regulated by Part 40. Same day service is available at our Harford NY DOT drug testing facilities and most of our DOT drug testing locations are within minutes of your home or office.
What type of DOT Testing is required?
Coastal Drug Testing provides DOT pre-employment, random, post-accident, reasonable suspicion and return to duty testing at our Harford NY DOT drug testing centers.
If you hold a CDL license, a large, medium or a small trucking company, Coastal Drug Testing has a complete DOT compliance package which includes all the requirements to comply with CFR 49 part 40.
All Coastal Drug Testing DOT drug testing centers utilize SAMHSA Certified laboratories and a licensed Medical Review Officer as required by DOT part 40 regulations.
The U.S Department of Transportation (DOT) requires that all DOT regulated "safety sensitive" employees have a negative DOT pre-employment drug test result on file and be actively enrolled in a DOT approved random drug and alcohol random testing pool (consortium).
In addition, if a DOT regulated company has more than one "safety sensitive" employee, the employer must also have a written DOT drug and alcohol policy along with an on-site supervisor that must have completed a reasonable suspicion supervisor training program.
On the road and need a DOT Drug or Alcohol test? No Worries!
To be compliant with DOT regulations, a company's DOT drug and alcohol testing program must have the following components:
- Employee Drug Testing
- Written Drug and Alcohol Policy
- Supervisor Training
- Substance Abuse Referral
- Employee Education
- Random Selection Program
- Post Accident Testing
- Designated Employer Representative
- Federal Chain of Custody Forms
- Part 40 Regulations on File
The Department of Transportation (DOT) has specific drug and alcohol testing requirements for the all transportation modes all DOT agencies.
Our modes included are:
- Federal Motor Carrier Safety Administration (FMCSA)
- Federal Aviation Administration (FAA)
- Federal Transit Administration (FTA)
- United States Coast Guard (USCG)
- Pipeline and Hazardous Materials Safety Administration (PHMSA)
- Federal Railroad Administration (FRA)
Are You Enrolled in a DOT Consortium?
Individuals who are employed in a position designated as "safety sensitive" must be actively enrolled in a random drug and alcohol testing program. Oftentimes, covered employees will join a group of other DOT regulated employees in a random testing program and this is referred to as a DOT Consortium. Generally, an employer who has less than fifty employees or single operators will join the consortium which will comply with the random drug and alcohol testing requirements of 49 CFR Part 40. Employers that have over 50 employees who are regulated by Part 40 may elect to be enrolled in a "stand alone" random testing pool.
The DOT consortium is cost effective and complies with all requirements of 49 CFR Part 40 which mandates that all "safety sensitive" employees be enrolled in a random drug and alcohol testing program.
The Department of Transportation (DOT) has strict regulations requiring regulated companies and independent operators (CDL License Holders) to be an active member of a DOT drug and alcohol Consortium and failure to comply with these regulations can result in significant fines and other DOT sanctions.
We are fully versed in the DOT procedures for pre-employment drug testing, random drug testing, reasonable suspicion drug testing, post-accident drug testing, return to duty drug testing and follow up drug testing.
DOT regulated companies with multiple safety sensitive employees must also have an employee within the company who is assigned as the "designated employer representative" (DER). This is the person responsible for removing any DOT "safety sensitive" employee who is covered by 49 CFR Part 40 from performing a DOT safety sensitive position when a positive drug or alcohol test result has occurred or an employee has refused to take a required DOT test.
If you have recently become a DOT regulated company, within the next 18 months the Department of Transportation (DOT) will conduct a "new entrant" inspection to ensure that you are in compliance with all DOT regulations including the drug and alcohol testing requirements. If you are currently a DOT regulated company, you are subject to regular inspections to ensure compliance.
Avoid DOT fines, penalties and be complaint with all DOT drug and alcohol testing regulations! Coastal Drug Testing can assist small, medium and large DOT companies in complying with all requirements of 49 CFR Part 40.
DOT Drug Testing Locations in Harford NY
1780 HANSHAW RD 11.0 miles
ITHACA, NY 14850
4038 WEST RD 12.2 miles
CORTLAND, NY 13045
134 HOMER AVE 12.7 miles
CORTLAND, NY 13045
10 ARROWOOD DR 12.8 miles
ITHACA, NY 14850
6 Euclid Avenue, 12.8 miles
Cortland, NY 13045
101 DATES DR 16.2 miles
ITHACA, NY 14850
1246 STATE ROUTE 38 19.6 miles
OWEGO, NY 13827
435 MAIN ST STE 28 & 30 21.4 miles
JOHNSON CITY, NY 13790
103 SOUTHSIDE DR 22.7 miles
OWEGO, NY 13827
415 E MAIN ST 24.4 miles
ENDICOTT, NY 13760
153 OAKDALE RD 24.6 miles
JOHNSON CITY, NY 13790
345 HARRY L DR, 24.9 miles
JOHNSON CITY, NY 13790
(Don't see a location near you? Call us (800) 828-7086)
Local Area Info: New York State Route 221
New York State Route 221 (NY 221) is a state highway in Cortland County, New York, in the United States. Its western terminus is at an intersection with NY 38 in the town of Harford. The eastern terminus is at a junction with NY 26 and NY 41 in the town of Willet. Near its western end, NY 221 intersects New York State Route 200. Together, NY 200 and NY 221 form a loop route off NY 38 between the hamlets of Harford and Harford Mills within the town of Harford. NY 221 originally followed modern NY 200 and ended at U.S. Route 11 (US 11) in Marathon when it was assigned as part of the 1930 renumbering of state highways in New York. It was extended to its present length by the following year and realigned to serve Harford later in the decade. NY 200 was assigned in the 1940s.
NY 221 begins at an intersection with NY 38 in the town of Harford. The route progresses northward through a small hamlet, crossing the Owego and Harford Railway and serving a mobile home park. At the intersection with Owego Hill Road, NY 221 turns eastward as a two-lane road, where the route changes backdrops into a more rural and residential mix. After about a mile, the route intersects with NY 200, a 1.37-mile long (2.20 km) route that connects NY 221 back to NY 38 and the hamlet of Harford Mills. At this junction, NY 221 turns north once again, while NY 200 begins on the former right-of-way used by NY 221. The surroundings remain the same as the route continues, turning to the northeast, and soon east at the junction at County Route 131 (CR 131; Babcock Hollow Road).
The rural road bends to the southeast gradually, entering the town of Lapeer, turning east again until it meets CR 133 (Clarks Corner Road). The highway soon reverts to a southeast direction, passing to the north of Beaver Pond and the county line, while NY 221 enters the hamlet of Hunts Corners and intersects with CR 136 (Jennings Creek Road). Here, NY 221 changes direction again, following a northeasterly path out of the hamlet. It bypasses the nearby hamlet of Clarks Corner and soon intersects with the eastern terminus of CR 133, which gives way to NY 221 as the state road merges with the east–west county highway. NY 221 continues on an eastward track into the town of Marathon, where it descends into the Tioughnioga River valley and enters the village of Marathon.